RSBA fiber-reinforced heat shrinkable sleeve for pressurized cable network maintenance

Heat shrinkable sleeve High split resistance due to fiber-reinforced layer Hot melt adhesive for pressurized closure

RSBA

Fiber-reinforced heat shrinkable sleeve for pressurized cable network maintenance

1.       General

   RSBA is the most advanced pressurized closure system available. It is based on a unique glass fiber reinforced heat shrinkable composite material. This new revolutionary material offers extra ordinary mechanical and environmental protection. Its reinforced material structure has an excellent split resistance during installation and superior mechanical toughness. The inner coating of hot melt adhesive guarantees a watertight and secure bonding to plastic and metal-sheathed cables. The white line inside of the trajectory and the temperature-sensitive paint on the sleeve can lead a good and right operation. The reinforced branch-off and straight closures have been developed to meet the increased demand in cable networks. The kit also contains a range of fully interchangeable air fittings which can be incorporated in the closure. These include a reversible valve, an air connector and a low profile blanking plug to reduce accidental damage.

2.       Features

---High split resistance due to fiber reinforced layer

---Limitation of split propagation in case of external damage to the sleeve

---Hot melt adhesive designed specifically for pressurized closure applications.

---Hot melt adhesive with wide temperature range

---Insensitive to sharp flame setting

---Range of closures to suit all cable sizes

---Few components, fast and easy installation

3.       Application

---RSBA closures are pressure-tight up to 70kPa pressurized telecom. cables networks.

---RSBA are suitable for use in manholes, for buried and aerial cables with polyethylene, lead and aluminium sheathing, up to 3600 pairs.

---RSBA closures are applicable both for straight as well as branch joints.

4.Specification

No.	Specification		Max. Splice Dia. (mm)	Min. Cable Dia. (mm)	Opening length (mm)	Sleeve length (mm)	Cable pairs(for reference)
	Straight (branch) joint	Straight (branch) joint with valve					Wire Dia. 0.5mm	Wire Dia. 0.4mm
1	RSBA(F)43/8-200	RSBAQ(F)43/8-200	43	8	200	450	10-50	10-50
2	RSBA(F)62/15-350	RSBAQ(F)62/15-350	62	15	350	690	50-200	100-200
3	RSBA(F)75/25-500	RSBAQ(F)75/25-500	75	25	500	850	200-400	300-500
4	RSBA(F)92/30-500	RSBAQ(F)92/30-500	92	30	500	850	400-600	600-800
5	RSBA(F)122/38-500	RSBAQ(F)122/38-500	122	38	500	900	600-1200	800-1400
6	RSBA(F)160/55-500	RSBAQ(F)160/55-500	160	55	500	950	1400-2000	1400-2400
7	RSBA(F)175/60-500	RSBAQ(F)175/60-500	175	60	500	950		2400-3000
8	RSBA(F)200/65-500	RSBAQ(F)200/65-500	200	65	500	950		3000-3600

5.Components

  -Reinforced heat shrinkable sleeve

  -Aluminium canister

  -Sheath connector assembly

  -Branch off clip

  -Emery strip

  -Cleaning tissue

  -Adhesive aluminium tape

  -Adhesive PVC tape

  -Stainless steel channel

  -Sealed aluminium strip

  -Nylon self-locking belt

  -Connection clip

  -Install instruction

RSBA fiber-reinforced heat shrinkable sleeve for pressurized cable network maintenance